OSHA 10 Hour Training Courses

How Employers Can Provide Safety Training for Employees

2011-01-21T01:46:00.000-08:00

By law, it is the responsibility of every employer to provide safety training to the employees, where it is necessary. Every workplace poses its own unique hazards. Therefore the training should include everything from general safety issues to hazard control. Similarly, the employees need to possess the skills required to be safe and prevent accidents.

For providing safety training to employees, employers should first survey the workplace for safety concerns. All businesses need to provide general safety training about fire safety and other general hazard awareness. However, other instructions will have to be industry specific.

Creating a safety committee or appointing a safety awareness officer should be the next step. This committee will have to be responsible for reporting hazardous work conditions, providing correct training to employees and making sure that workplace safety sheets are available in the prominent places.

Employers should also check with the government regulations on the frequency and type of training that has to be provided OSHA has set down certain guidelines for workplace safety training that need to be followed by all organizations. Employers could also consider investing in safety training materials like workbooks and DVDs. This is the most cost effective and efficient training you can provide for your employees.

Steps to Lodge a Complaint on Unsafe Working Conditions to OSHA

2011-01-13T03:58:00.000-08:00

OSHA or the Occupational Safety and Health Administration, is a federal agency that overlooks the enforcement of safe work practices at work sites. These standards aim towards minimizing the likelihood of workplace injuries and accidents. It is mandatory to comply with the OSHA standards. If your company has unsafe working conditions, you should immediately report it to OSHA.

1.Follow the protocol. Usually, OSHA prefers it that you report all your work place safety concerns to the employer first. This will give your employer the chance to look into these matters and fix them. Many a times, the employers are not aware of the unsafe working conditions existing at the company.

2.If you find that your employer is not doing anything about your complaint or ignoring it completely, move forward with the complaint process. Go through the official website of OSHA and find out whether your workplace is covered by a federal program.

3.Make your complaint. There are a variety of ways through which you can file your complaint. You can either do it online or call or write to the nearest OSHA office. The URLs, telephone numbers and addresses of the all the regional offices of OSHA can be found at the OSHA website.

Regulations Laid Down by OSHA on the Use of Power Tools

2011-01-06T01:26:00.000-08:00

The Occupational Safety and Health Administration has laid down specific rules that have to be followed by all those who use power tools. All companies and businesses that make use of these tools are required to follow all the regulations put forward by the agency.

There are many workplace risks that are entirely unavoidable. However, OSHA focuses on prevention of danger and thus states that simple equipments like goggles and gloves can make a huge difference in the safety of the employees. Workers should make use of these equipments when they are working with power tools. Also, all the employees that are going to work with power tools and machinery are supposed to undergo proper training before they start working with them.

All workers using power tools should not carry the tool by its cord, as mandated by the agency. Also, the power cord should not be pulled out of its electric source by force. These cords should be kept as far away as possible from any type of sharp and heat emitting objects.

There has to be a guard covering the moving parts of a power tool when it is in use. These parts can be spindles, belts, gears and pulleys. Neck ties and jewelry is supposed to be taken off before operating a power tool.

Heat Stress & OSHA

2010-12-10T00:24:00.000-08:00

If your workers work outdoors for long periods and are subjected to high temperatures or are actively involved in physically exhausting work, then they may be susceptible to heat stress. In such circumstances, your employees are required to undergo the OSHA trainings in order to combat heat stress disorders and to prevent any further occurrences.

Heat stress and other heat related disorders can result in anything from a moderate headache to tiredness and moderate rashes to severe sunburns, skin cancer and in some cases, a fatal stroke. This is why it is very important to identify and then treat the symptoms as quickly as possible. Heat stress is an issue that should not be taken lightly at all!

Most heat stress disorders are caused due to long exposures to the sun and other high temperatures that may cause dehydration. What’s more, sweating is also the body’s way of attempting to cool off but can result in a tremendous loss of vital fluids and salts that the body needs to be hydrated.

This is why OSHA has made it compulsory for employees to undergo strict trainings before working outdoors or before being exposed to high temperatures. As an employer, it is very important to ensure that all you employees are trained and know how to overcome heat stress and other heat related disorders.

Fixed Ladder Safety Requirements as per OSHA

2010-11-26T00:12:00.000-08:00

The U.S. Occupational Safety and Health Administration was first formed with a view of reducing occupational injuries and deaths. The construction industry involves the use of ladders. Injuries and fatalities occur due to the use of these fixed ladders and thus OSHA has laid down certain requirements to ensure that ladders are safe to use. OSHA 10 hour construction training courses teach all about the ladders and their proper use.

Every fixed ladder should have rungs of a certain diameter depending upon its material. For example, in case of wood, the rung should have a diameter 1 1/8th of an inch. This will ensure that the rungs don't get damaged during use. The rungs should also have a uniform distance of no less than twelve inches. Similarly, every point on the ladder should be able to withstand at least a 200 pound load.

The maintenance of fixed ladders is a must. To resist rust and corrosion, metal ladders should be painted and treated. Likewise, the wooden ladders should be treated with a substance that prevents rotting and thus avoids accidents. The landing boards on either end of the ladder should be positioned within twelve inches from the rung that is closest to it. They should also have toe-boards and railings to alert a climber that he is nearing a ladder.

Get To Know Your Scaffolding Equipment a Little Better

2010-11-15T01:36:00.000-08:00

Scaffoldings provide a great deal of support to workers and employees during any construction process. These are important instruments, for they are used when work needs to be done at a height from the ground level. This scaffolding equipment is available in both, movable and stable structures, with rollers and wheels.

However, the movable ones are more popular because of their flexibility. This simply means that there is no extra time and effort wasted, in dismantling the scaffold, when it needs to be shifted from one place to another. These scaffolds simply slide from the front to the rear and they can also be raised or lowered in accordance to the need at hand.

There are basically three different types of scaffolding equipment that are easily available in the markets. They are:

1.The H-frame
2.The light and
3.The versatile

Workers can easily perform all their tasks with the help of these types of safety equipment. But usually, workers are not aware about such scaffolding equipment and even if they are, they very often do not know how to use them appropriately and effectively. Thus the OSHA safety training courses were designed and developed by experts in various fields to help and protect workers, in their day-to-day jobs.

What is the OSHA 10 Hour DOL Card

2010-10-22T03:20:00.000-07:00

OSHA was first created to ensure that workplaces across the United States were safe and healthy and workers were not vulnerable to accidents. The OSHA 10 hour training courses were then developed to improve the worker’s safety in the general as well as construction industries. You can either take these courses online, or you can attend a live classroom session. Apart from safety purposes, there are many reasons for taking these courses, which include: government requirements, insurance discounts, contractor or employer obligation, and of course, overall workplace safety.

The OSHA 10 hour training courses covers a variety of topics that deal with the most hazardous situations for workers. There are many hazards present at any workplace, and it is very important to understand and know what the right way to prevent accidents from happening is.

Many a times, you may have heard of workers talking about the OSHA 10 hour card or the OSHA 30 hour card. But what exactly is the OSHA 10 hour card? This is basically a wallet sized card that acts as a proof that you have completed the course. What’s more, you will also be given a certificate of completion to prove that you have taken the course, and that the course that you underwent was recognized and accepted by OSHA. The OSHA cards will never expire, and if you look carefully, they have no expiration dates as such. However, Nevada is the only exception, as it required a new card to be issued to workers every 5 years. If you take the OSHA 10 hour training courses online, you will still receive the same card.

Today, many states and government agencies as well as private companies, have made it compulsory for workers to have the OSHA 10 hour card, before they enter a work site. Places like New York State, Nevada, Massachusetts and New Hampshire all require workers to have the OSHA 10 hour card in order to work on public funded projects of varying sizes.

The Different Types of Inspections carried out by OSHA

2010-10-11T22:58:00.000-07:00

Usually, inspectors are sent out by OSHA to various work sites. There are many different reasons to this. OSHA compliance officers suspect potential danger, and then inspect. Through this inspection, OSHA can respond to the complaints put in by the workers, the accidents and fatal injuries. Regular inspections and visits are programmed by OSHA. This is done to catch hold of violations. Often there are chances of a re-inspection after the first inspection comes up with violations. OSHA 10 hour General Industry courses teach the types of inspections. The various kinds of inspections carried out by the OSHA inspectors are as listed below:

Imminent Danger: If an OSHA officer is absolutely certain that there exists a life threatening danger at the work site, they consult the employer and ask him to either eliminate the danger or evacuate all the employees from it. Here, the officer does not even wait for the regular OSHA procedures to be followed. If the employer refuses to comply, OSHA applies to the federal district court. If he complies, OSHA re-inspects the work sites after a number of allotted days.

Investigative: OSHA investigates those accidents that cause serious injuries and even death. The inspection should be carried out as soon as the injury causing hazard has been gotten rid off. Inspection is usually recommended by OSHA after one day. Inspectors interview all the employees, the supervisors, first responders and the law enforcement officers.

Employee Complaint: OSHA 10 hour General Industry courses say that any employee, who feels that their employer is violating the OSHA standards, can ask OSHA to perform an inspection. However, the inspection is not limited to only the complaint. Other areas too, that have not been mentioned in the complaint, may be inspected.

Programmed: Basic inspections are carried out by OSHA at hazardous work sites. These work sites are selected on the basis of the reported accidents, fatalities and dangers that are associated with the work carried out at that site.

Re-inspection: After the violations are found at an industrial facility, the employer is notified of it by OSHA. Also, he is allowed an adequate period of time to correct the cited problems. The employer has all the rights to challenge the violations. At this, OSHA responds by taking into consideration the point of view of the employer. It might also make the appropriate arrangements with the employer. If the citation is upheld, a follow up inspection is carried out to see if the violations have been put right.For further information, visit: http://www.osha10hourtrainingcourses.com

Watch out for Welding Hazards at Work

2010-10-08T01:45:00.000-07:00

If you are involved in a lot of welding activities at work, then you should know that it is indeed one of the deadliest work activities you can be involved in. Anything can go wrong at any minute. Welding hazards are perhaps the biggest cause for injuries in the construction industries, and most of the injuries can be prevented with a little bit of precaution and a little safety training.

Some of the hazards include:

1.Noise hazards – If workers are constantly exposed to loud noises, it can result in permanent damage and hearing disabilities. All employees must wear OSHA approved ear protection to prevent these hazards.

2.Electrical Hazards – There is always a possibility that you may go through an electric shock while welding. If there is water on the floor, or there is not enough space to move around, it is best to refrain from welding. Always use gloves.

3.Hazardous Fumes – While welding, different gases can be released. Depending on the material that is being welded or painted, harmful gases can be released. These gases can cause flu, fever, body ache, sore chest, wheezing, coughing and even nausea.

Using adequate protection while welding is always the safest bet.

Lead Exposure – Preventive Measures

2010-09-16T01:33:00.000-07:00

The consequences of occupational lead poisoning can be so lethal that OSHA has put out strict protective measures in the general industry lead standard - 29 CFR 1910.1025.

OSHA has set the Permissible Exposure Limit (PEL) for lead currently at 50 micrograms of lead per cubic meter of air for an average of over an 8-hour workday.

When employees are exposed to lead while on work, protective measures are required. So what exactly must the employers make sure of?

The employees must be trained to recognize hazards and take proper precautions to prevent lead exposures. The OSHA safety training program will train employees about the hazards of lead exposures and the preventive measures on how they can reduce and eliminate the hazards.

In the lead work areas, warning signs must be posted.

The ventilation installed must be tested every 3 months.

Work rotation is implemented.

Appropriate PPE or personal protective equipment including respirators must be provided.

The contaminated PPE and work clothes must be removed only in assigned changing rooms.

The work and street clothing are stored separately.

Before going to lunch room, workers must vacuum lead dust from the clothing and wash.

Workers must shower when their shift is over.

The floor and work surfaces exposed with lead must be cleaned with the help of a vacuum with HEPA filters.

OSHA 10 Hour General Industry Course

2010-05-07T01:42:00.000-07:00

The Occupational Safety and Health Administration has regulations for the safety and health of workers in construction, maritime and general industry. Standard 29 Part 1910 has a summary of the OSHA General Industry Standards. Sub part D deals with Walking-Working Surfaces that are a chief cause of injuries and provides regulations regarding the guarding of floor and wall openings, fixed industrial stairs and ladders, portable metal and wood ladders and safety requirements for scaffolding. Specifications regarding the construction requirements and design of exit routes, fire and emergency prevention plans are outlined under Means of Egress.

Other standards include those for Man lifts,Powered Platforms and Vehicle-Mounted Work Platforms,Hazardous Materials, Occupational Health and Environment Control, Personal Protective Equipment like face,head, eye and respiratory protection, General Environmental Controls like specifications for sanitation and accident prevention tags and signs, Medical and First Aid, Compressed Gas and Compressed Air Equipment,specifications for Fire Protection, Handling and Storage of Materials, Machinery and Machine Guarding, Welding, Cutting and Brazing, Special Industries, and Electrical Safety Requirements.

OSHA 10-hour Training for General Industry briefs students to OSHA standards,policies and procedures and also acquaints them with the safety and health regulations for General Industry. Topics like Introduction to OSHA, Citations and Inspections,OSHA Act, Walking and Working Surfaces, Means of Egress and Fire Protection, Electrical Safety, Machine Guarding, Personal Protective Equipment, Hazard Communication, Introduction to Industrial Hygiene and Blood borne Pathogens and safety and Health Programs are covered in this OSHA 10 hour training module.

Safety Training in OSHA standards for General Industry is a precursor to prevent any of work-related accidents, deaths, injuries and maintenance of safety and health of workers.

OSHA 10 Hour Training Courses

2010-04-06T04:18:00.000-07:00

Are you safe at your work place? Only experience can not work effectively all the time as nothing remains static but everything changes as time passes. For the proper safety of workers at work place, proper safety training is necessary. OSHA 10 hour training courses has contributed regarding the safety matter of the workers at working place. This training course is designed for the workers who work at construction and general industries . The course is very essential for them as it suggests the trainees about the basics of occupational safety and health issues. This course is a compulsory training for the workers and it is conducted by the employers of the industries as it is a significant OSHA regulation. This must have to be conducted by the construction and general industries themselves. But, the most notable point is that this course can not cover all the workers and the trainees who need this course. So, many private agency or websites have introduced online OSHA 10 hour training courses to involve numerous trainees so that they can diminish, identify, remove and report risks that are generally associated with their job.

OSHA 10 Hour Training Courses provides effective OSHA 10 hour training to the workers at a lower price. They have experienced experts who can give all the safety measures to their trainees tactfully and their courses are designed with care so that it can become comprehensive and also enjoyable for the trainees. Most importantly,the courses they provide are recognized by OSHA.

This OSHA 10 hour training courses are really helpful for the workers and it can definitely save their life and thus can develop the growth of the industries also.

Do You Know The Most Common Construction Accidents That Occur

2009-12-14T04:04:00.000-08:00

Any construction zone can be a dangerous work environment. There can possibly be an intimidating variety of accidents in a construction zone due to the inherently dangerous nature of the work. Heavy machinery and equipment, holes, loud noises and heights pose threats to the unaware worker. You may be the most careful worker on the site but when it comes to safety, nothing is without some element of risk, however small it may be.

The most construction accidents that take place in a workplace could be avoided if the company properly follows the health and safety regulations. But unfortunately there are many companies that do not follow strict health and safety guidelines as workers on the construction sites are most likely to be killed by construction accident than any other type of employment. Give below are the most common accidents on the construction sites:

• Welding accidents

• Scaffolding accidents

• Lifting equipment failure

• Falls from roof

• Trench collapses

• Crane accidents

• Electric shock injury

• Accidents caused by fire or explosion

• Falls from ladders

• Electrocutions

• Holes in flooring

• Compressed gas accidents

• Unsafe safety harness

OSHA 10 Hour Construction courses are designed for the workers, job supervisors, foremen, and anybody who is involved in the construction industry. This type of safety training course introduces the employees to the basic knowledge to identify, reduce and eliminate and report the hazards associated with their work.